- THIS POSITION IS BEING ADVERTISED THROUGH THE DIRECT-HIRE AUTHORITY (DHA) FOR SCIENCE, TECHNOLOGY, ENGINEERING, MATHEMATICS (STEM) AND CYBERSECURITY POSITIONS*
- Applications will be accepted through 7 September 2020. Announcement MAY CLOSE EARLIER if all available vacancies have been filled prior to 7 September 2020.*The 1st Cut-Off date for receipt and referral of applicants to be considered for vacant positions will be March , 19 2020. Afterward, referrals will be pulled as vacancies occur.
Serve as the Lead Mechanical Engineer and Subject Matter Expert (SME) in the General Engineering Section of the New England District (NAE).
Provide expert mechanical products, services, and support for mechanical features on a wide range of projects for Military, Civil Works, International and Interagency Support (IIS), and Hazardous and Toxic Radiological Waste (HTRW) programs.
The design projects cover a large variety of buildings including but not limited to; barracks, child care facilities, hospitals, medical clinics, laboratories, family housing, maintenance facilities, special test facilities, etc.
Civil works design include such projects as earth, rockfill and concrete dams, reservoirs, channels, levees, harbor protection structures, and water control and conveyance facilities.
As a recognized senior technical specialist in mechanical design, the incumbent focuses on specific mechanical features, such as heating, ventilation, cooling, plumbing, fuel systems.
Other specific mechanical features include; specialized mechanical equipment, pumping stations, safety services, and communications systems.
Occasional travel - Overnight business travel required up to 10% of the time.
Job family (Series)
0830 Mechanical Engineering
Conditions of Employment
Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
Incumbent must be able to obtain and maintain a valid state drivers license within 30 days of appointment.
Relocation/PCS MAY BE authorized.
Recruitment/Relocation/Retention Incentive MAY BE authorized.
See other requirements below.
Who May Apply:
In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
All applicants must meet one of the following education requirements
Basic Requirement for the Mechanical Engineering 0830 Series:
Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
B. Combination of Education and Experience:
College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In addition to meeting one of the basic requirements above, to qualify for this position you must also meet the qualification requirements listed below:
One year of specialized experience includes meeting all of the following: 1) Experience developing detailed mechanical engineering reports, plans, and/or specifications for new construction, renovation, or rehabilitation projects; and 2) review mechanical engineering reports, plans, and/or specifications for commercial or government clients. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12).
Selective Placement Factor:
This position requires: (a) current state issued Professional Engineering Registration (P.E.. You must include a copy of your current state issued Engineering license with your application package. If you fail to provide a copy of your current state issued Engineering registration your application packet may be found incomplete.
If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
You will be required to provide proof of U.S. Citizenship.
Two year trial/probationary period may be required.
Direct Deposit of Pay is required.
Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
This is a Career Program (CP) - 18 position.
Multiple positions may be filled from this announcement.
Salary includes applicable locality pay or Local Market Supplement.
When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction.htm for more information.
If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
Background checks and security clearance
Drug test required
As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you may be marked as having an incomplete application package and you will not be considered any further.
1. Your resume:
Your resume may be submitted in any format and must support the specialized experience described in this announcement.
If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy.
For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.e., HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position.
For additional information see:
What to include in your resume.
2. Other supporting documents:
Cover Letter, optional
Most recent Performance Appraisal, if applicable
This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses
This position requires a job-related license or certification. You MUST submit a copy of your license or certification with your application package or you will be rated ineligible. See: Transcripts and Licenses
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
A career with the U.S. Government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Learn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time, or intermittent. Contact the hiring agency for more information on the specific benefits offered.
This job is open to
U.S. citizens, nationals or those who owe allegiance to the U.S.
Clarification from the agency