See below for important information regarding this job.
Serve as the Passive and Electromechanical Devices Branch Chief in the Product Test Center Division of the Engineering and Technical Support Directorate.
Serve as the principal advisor to the Chief of the Product Test Center Division on assigned activities.
Provide for the formulation and control of policy and procedures and oversight pertaining to initiation, development, preparation, and coordination regarding product testing and review of the testing of DLA electronic items.
Serve as the expert authority in making engineering decisions leading to the proper selection, test and evaluation of electronic devices.
Occasional travel - You may be expected to travel for this position.
Job family (Series)
0855 Electronics Engineering
Conditions of Employment
Must be a U.S. citizen
Tour of Duty: Flexible
Security Requirements: Non-Critical Sensitive
Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
Fair Labor Standards Act (FLSA): Exempt
Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
Recruitment Incentives: Not Authorized
Supervisory Probation: Required
Completion of Supervisory Certification Program: Required
Bargaining Unit Status: No
To qualify for a Supervisory Electronics Engineer, your resume and supporting documentation must support:
A. Basic Requirement: A Bachelor's Degree or higher in professional engineering. To be acceptable, the program must: (1) be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
A combination of education and experience - college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
A. Professional Registration or Licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by
means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
B. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
C. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in ENGINEERING SERIES (0801) CONT'D If Education cannot be substituted (GS-12 and higher) you should delete the paragraph all together . 1/30/2018: Added per updated IOR engineering that included the courses specified in the Basic Requirements above. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in the Basic Requirements above.
D. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g. engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position, and is directly in or related to this position. In addition to meeting the Basic Requirement above, to qualify for the GS-13 grade level, specialized experience must be at the GS-12 grade level or equivalent under other pay systems in the Federal service, military or private sector. Applicants must meet eligibility requirements including time-in-grade (General Schedule (GS) positions only), time-after-competitive appointment, minimum qualifications, and any other regulatory requirements by the cut-off/closing date of the announcement. Creditable specialized experience includes:
Work as a senior engineer on test projects.
Planning, organizing, coordinating, directing, or leading a team in the accomplishment of engineering project(s).
Experience/knowledge of the methodologies utilized to test electronic devices such as microcircuits and semiconductors
Providing for the formulation and control of multiple mission requirements.
Identifying complex problems and developing solutions.
Conducting studies to determine achievement of program goals and objectives and development process improvement
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Substitution of education may not be used in lieu of specialized experience for this grade level.
You MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: Unofficial transcripts are acceptable at time of application.
GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours that your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.
MILITARY SPOUSE PREFERENCE: In order to receive this preference you must choose to apply using the "Priority Placement Program, DoD Military Spouse Preference (MSP)" eligibility. If you are claiming military spouse preference and are determined to be among the Best Qualified for the position, you will be referred to the hiring manager as a priority applicant.
For Important General Applicant Information and Definitions go to: http://www.dla.mil/portals/104/documents/careers/GenAppInfoDef.pdf
Reemployed Annuitants: This position does not meet criteria for appointment of Reemployed Annuitants. The DoD criteria for hiring Reemployed Annuitants can be found at: http://www.esd.whs.mil/Portals/54/Documents/DD/issuances/140025/1400.25-V300.pdf
INFORMATION FOR VETERANS is available at: http://www.dla.mil/Careers/Programs/veterans.aspx. As of 23 December 2016, Military retirees seeking to enter federal service in the Department of Defense now require a waiver if they would be appointed within 180 days following their official date of retirement.
DRUG-FREE WORKPLACE: The Defense Logistics Agency (DLA) has established a Drug-Free Federal Workplace Policy. All applicants tentatively selected for DLA employment in a testing designated position are subject to urinalysis to screen for illegal drug use prior to appointment. Applicants who refuse to be tested will be denied employment with DLA for a period of six months. This policy extends to random testing for the use of illegal drugs by employees who occupy testing designated positions defined as sensitive in Section 7(d) of Executive Order 12564. The Defense Logistics Agency's Drug Free Workplace Plan's drug testing panel includes testing for the following illegal substances: marijuana, cocaine, opiates (codeine/morphine), 6-Acetylmorphine (heroin), phencyclidine, amphetamines (amphetamine/methamphetamine), methylenedioxymethamphetamine (MDMA), methylenedioxyamphetamine (MDA), oxycodone, oxymorphone, hydrocodone, and hydromorphone. ADVISORY: By using cannabidiol (CBD) products you are risking a positive drug test result for marijuana.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
The assessments for this job will measure the following Competencies:
Engineering Project Management
Planning and Evaluating
Once the application process is complete, a review of your resume and supporting documentation may be completed and compared against your responses to the assessment questionnaire to determine if you are qualified for this job. The rating you receive is based on your responses to the assessment questionnaire and USA Hire assessments. The score is a measure of the degree to which your background matches the competencies required for this position. If your resume and/or supporting documentation is reviewed and a determination is made that you have inflated your qualifications and or experience, you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your rating.
Background checks and security clearance
Drug test required
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
To apply for this position you must provide a complete Application Package. Each Application Package MUST include:
Your Resume listing work schedule, hours worked per week, dates of employment and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for the qualifications and referred for selection consideration if eligible.
Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents.
If you are requesting a reasonable accommodation to the DLA Supv Situational Judgment Test, submit documentation to support your request, including the Reasonable Accommodation Request Form found here.
If you are claiming Military Spouse Preference, you must submit the following supporting documents with your application package: Marriage Certificate or License; Signed Self-Certification Checklist (must be certified within 30 days); Veterans' Preference documentation (e.g., DD-214, VA Letter, Statement of Service, if applicable); Transcripts (if applicable). These documents must provide acceptable information to verify: Residency within the commuting area of your sponsor's permanent duty station (PDS); proof of marriage to the active duty sponsor; proof of military member's active duty status; and other documentation required by the vacancy announcement to which you are applying. NOTE: Previous federal employees must also submit the following additional documentation: SF-50s (e.g., LWOP, highest grade held, overseas appointments, etc.), SF-75 information, and documentation of performance rating of record (dated within the last 12 months).
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
A career with the U.S. Government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Learn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time, or intermittent. Contact the hiring agency for more information on the specific benefits offered.