Risk Based Integrity Engineer - Lloydminister, SK
On behalf of our client, Procom is searching for Risk Based Integrity Engineer for a 12 month contract in Lloydminster, SK.
Risk Based Integrity Engineer Job Details
This position supports the development, implementation and sustainment of the Risk Based Integrity Management (RBIM) Program for pressure equipment and pressure piping. This includes providing technical support and coordination to all parties involved in the program as well as developing and implementing processes and procedures. Travel will be required occasionally.
Risk Based Integrity Engineer Responsibilities
Lead and/or support Risk Based Integrity Management (RBIM) implementation (baseline).
Lead and/or support facilities actively practicing RBIM methodology (sustainment).
Lead / assist in the developing and then continuously improving of the RBIM processes, procedures and templates.
RBIM Implementation Project Activities:
Lead scope time based vs risk based equipment determination.
Lead equipment data collection, validation and quality assurance.
Lead system and piping circuitization.
Support Corrosion Study (Corrosion Control Document (CCD))
Lead Production Loss Consequence (PLC) determination.
Lead initial Risk Assessment determination.
Support Baseline Inspection Work Planning (IWP) activities ,including:
a. Review NDE recommendations.
b. Perform IWP optimization, including review and approval for CML placement coverage for vessels and piping circuit inspection plan optimization by grouping into process systems for inspection.
c. Assess requirements for initial inspection screening to determine if any inspection data are needed to verify corrosion rates and damage mechanisms prior to a full baseline inspection program.
d. Support field external visual inspection, work with the team to coordinate visual external inspection and data update, including reviewing reports.
e. Complete RBIM inspection strategies review, ensure recommended tasks are adequate for coverage as required for fixed equipment types, criticality ranking, and failure mechanisms.
Lead and/or support Integrity Operating Window (IOW) determination.
Lead Risk re-assessment determination.
Support ‘Sustainment’ Inspection Work Planning activities:
a. Conduct final technical review before work activities commence, and approval of CML deviations on change management forms.
b. Perform initial fitness for services assessment following applicable standards and procedures. Analyze and identify areas to investigate (erroneous readings, high damage rate, etc.).
c. Define the follow-up inspections as required per inspection strategies.
Sustainment Program Activities:
Providing technical support and overall leadership, coordination, and alignment across RBIM stakeholders.
Coordinating operations, maintenance, engineering and inspection personnel to optimize existing asset reliability.
Building alignment and supporting documentation (process, procedures, work instructions and templates) to standardize RBIM sustainment across all facilities.
Evaluating and performing risk re-assessments based on other equipment/piping from inspection findings.
Supporting the inspection work planning cycle; including:
a. Coordinating and following up with inspections activities and NDE evaluations.
b. Reassessing piping grouping to determine if changes are required for representative circuits follow-up inspection.
Managing all changes impacting RBIM equipment scope and sustaining associated documentation:
Sustaining the following documents:
? Time based / risk based equipment list.
? System and Circuit Drawings, Circuit Catalogue
? Corrosion Control Document
? Production Loss Consequences
Establishing, sustaining, monitoring, and analyzing Integrity Operating Windows (including process conditions); taking appropriate action as required.
Managing integrity threats as needed.
Facilitating deferral risk assessments.
Supporting other program initiatives and strategy development, including updating/managing dead-leg registers, participating in HAZOPs, LOPAs, and Incident Investigations to determine RBIM impact and support Turnaround Planning (using RBIM Program Tools).
Supporting continuous improvement, tracking and reporting on KPIs, and performing periodic assessments to identify gaps and develop plans to close the gaps.
Risk Based Integrity Engineer Must Have Skills
Our ideal candidate will have the following qualifications:
Ability to facilitate meetings & integrity related workshops/sessions with operational stakeholders
Ability to work independently and show leadership in risk based integrity program.
Degree in Chemical, Materials, Mechanical Engineering or Technologist
5 Years Experience in the field of Risk Based Integrity Management in oil & gas or petrochemical industry
5 Years Experience with integrity software tools (LR Capstone and/or Mistras PCMS would be an asset).
Knowledge of API 510, API 570, API 571, API 574, API 579, API 580, API 581, API 650, API 653, API970
5 Years Owner / Operator experience; operating facility exposure.
Professional Status (P.Eng or Professional Licensee)
5 Years of RBI implementation and/or sustainment experience
Strong technology skills in MS Office
Willing to relocate to Lloydminister
Risk Based Integrity Engineer Nice to Have Skills
Knowledge of materials of construction, selection, limitation, use and welding problems.
Knowledge of Risk based inspection tools, Lloyd’s Register Capstone – RBMI software
3 Years Working experience in the areas of inspection/reliability, risk assessments & risk-based inspections
Working knowledge of ABSA documents AB-505 and AB-506
Risk Based Integrity Engineer Assignment Length
Risk Based Integrity Engineer Location
Risk Based Integrity Engineer Start Date
September 1, 2020