This position is located with the Bureau of Indian Affairs, Great Plains Region, Division of Facilities, in Aberdeen, South Dakota, Rapid City, South Dakota, and Winnebago, Nebraska.
TRAVEL AND RELOCATION EXPENSES WILL BE AUTHORIZED IN ACCORDANCE WITH THE FEDERAL TRAVEL REGULATIONS.
THE PAY FLEXIBILITIES OF A RECRUITMENT BONUS, RELOCATION BONUS OR STUDENT LOAN REPAYMENT MAY BE AUTHORIZED, PENDING AVAILABILITY OF FUNDS AND MANAGEMENT APPROVAL.
Provides guidance and technical advice on architectural and engineering design, construction, maintenance and repair of all types of facilities.
Assure proper execution and conformance with Facility Management objectives.
Serves as Project Manager, Contracting Officer's Representative or Contracting Officer's Technical Representative, and/or Awarding Officials Technical Representative for the management of contracts.
Ensure compliance with contractual and program requirements.
Occasional travel - You may be expected to travel for this position.
Job family (Series)
0801 General Engineering
Conditions of Employment
U.S. Citizenship Required
Preference in filling vacancies is given to qualified Indian candidates in accordance with the Indian Preference Act of 1934 (title 25, USC Section 472). Form BIA -4432 must be submitted with the application if claiming Indian Preference.
You will be required to have federal payments made by Direct Deposit
You may be required to successfully complete a probationary/trial period
A background security investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background security investigation and favorable adjudication.
If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
Incumbent is required to operate a government motor vehicle, must possess a valid driver's license, and have a safe driving record within the 3 year period immediately preceding submittal of GSA Form 3607.
EXPERIENCE AND EDUCATION REQUIREMENTS: (OPM Operating Manual, Qualification Standards for Professional and Scientific Positions, GS-800, Individual Occupational requirements for GS-800, All Professional Engineering Positions, GS-801).
Basic Requirements For General Engineer, GS-0801:
1. Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
2. Combination of education and experience-college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration-Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination.
3. Specified academic courses-Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A.
4. Related curriculum-Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
ADDITIONAL EXPERIENCE REQUIRED: In addition to meeting the basic entry level qualification requirements, applicants must have the following:
GS-12: I have one (1) year specialized experience equivalent to at least the GS-11 grade level in the Federal service that included performing engineering work related to development, planning, design, construction, and operation and maintenance of building and infrastructure projects. Independently scheduled and conducted site visits, project inspections, and project coordination meetings with stakeholders including design professionals, other government officials, and building end users. Work is generally performed independently with only occasional and indirect oversight by a supervisor for even the most complex conditions.
GS-11: I have one (1) year of specialized experience equivalent to the GS-9 grade level in the Federal service that included performing engineering work in construction and maintenance of buildings, facilities, bridges, major structures, and roads; design and preparation of project plans and specifications; establishing project and facility inspection requirements; and providing engineering expertise and technical guidance on various topics. Work performed only occasionally required direct oversight by a supervisor when involving especially complex or difficult conditions.
GS-09: I have 1 year of specialized experience that equipped me with the particular knowledge, skills and abilities to successfully perform the duties of this position. This experience is related to the work of the position and equivalent to at least the GS-07 level in the Federal service as described in the vacancy announcement. Examples include: Assist with the design of engineering and contract administration of projects or facility improvements; participate in the development of procedures, guidelines, operational and preventative maintenance activities designed to improve Facilities Management Programs.
SPECIALIZED EXPERIENCE: Experience that equipped the applicant with the particular knowledge, skills, and abilities (KSA's) to perform successfully the duties of the position, and is typically in or related to the position to be filled.
All qualification requirements must be met by the closing date of this announcement.
Merit Promotion candidates must also meet time-in-grade requirements by the announcement closing date.
Preference in filling vacancies is given to qualified Indian candidates in accordance with the Indian Preference Act of 1934 (title 25, USC Section 472).
If you are qualifying based on your education, you MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.
If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.
One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.
If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education which shows the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: FOREIGN EDUCATION
All new hires earn the beginning salary of their pay grade (Step 1). See 2020 Salary Tables here and select the duty station from the Aberdeen, South Dakota, Rapid City, South Dakota, and Winnebago, Nebraska to choose the appropriate pay chart. If no specific chart is listed for this geographic location, see the "rest of U.S." chart.
The full performance level of this position is GS-12. Promotion potential in this announcement does not constitute a commitment or an obligation on the part of management to promote the employee selected at some future date. A career ladder promotion is at the discretion of management, and in no way guaranteed.
TELEWORK: Indian Affairs has determined that the duties of the position are suitable for telework and the selectee may be allowed to telework with supervisor approval.
You will be required to operate a government-owned or leased motor vehicle in the performance of duties, therefore, a valid driver's license is required. Incumbent must have a safe driving record within the three-year period immediately preceding submittal of GSA Form 3607 and be able to meet the safe driving requirements of the Bureau of Indian Affairs.
Career Transition Assistance Programs: These programs apply to employees who have been involuntarily separated from a Federal service position within the competitive service or Federal service employees whose positions have been deemed surplus or no longer needed. To receive selection priority for this position, you must: (1) meet CTAP or ICTAP eligibility criteria; (2) be rated well-qualified for the position with a score of 85 or above; and, (3) submit the appropriate documentation to support your CTAP or ICTAP eligibility. For more information visit: http://www.opm.gov/rif/employee_guides/career_transition.asp .
Certain candidates may be eligible to apply under a special hiring authority including those for disabled individuals, Peace Corps employees, Foreign Service employees, veterans, etc. For more information, visit the following OPM websites: USAJOBS Information Center: https://www.usajobs.gov/Help/; Vets Info Guide: http://www.fedshirevets.gov/.
Former Federal Employees are required to indicate whether they received a Voluntary Separation Incentive Payment (VSIP) buyout in their previous employment with the Federal government, and are required to submit a copy of the applicable Notification of Personnel Action (SF-50) regarding the VSIP. Most individuals who accept reemployment with the Federal government within 5 years of receiving the VSIP amount, must repay the gross amount of the separation pay prior to reemployment.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your application package will be evaluated against the minimum qualification requirements specified above. In order to qualify, your resume must specifically describe your work history and the duties you performed in each position. Your resume will be evaluated after the closing date of 02/27/2020 to determine whether you meet the minimum qualification requirements for this position. Competencies measured include:
Building and Construction
We will compare your resume and supporting documentation to your responses on the assessment questionnaire. If the information in your resume does not support your responses to the assessment questions, your score may be adjusted to more accurately reflect your qualifications.
Qualified Indian preference candidates will be referred to the hiring manager in order of veterans' preference.
You may preview the assessment questions here in the https://apply.usastaffing.gov/ViewQuestionnaire/10718606.
Background checks and security clearance
Drug test required
Position sensitivity and risk
Moderate Risk (MR)
Trust determination process
The following documents are required for this position:
Resume which details work experience including dates worked (mm/yy-mm/yy), position title, Grade (if federal service), and hours worked per week.
On-line Assessment Questionnaire
Most recent SF-50 (if applying under merit promotion. Be sure your SF-50 displays your tenure in box 24, your position in box 34, and that the SF-50 is not an award)
Transcripts (if using education to qualify) - Unofficial transcripts are acceptable; however, an official transcript may be requested at a later time.
Veteran's documentation - (if applicable) VA letter on VA letterhead stating your overall combined rating, SF-15, DD-214 (copy 4) reflecting an honorable discharge and dates of active duty military service.
Special Appointing Authority documentation (if applying under a special hiring authority)
BIA Form 4432 (if claiming Indian preference)
Performance Appraisal (if applying under the Land Management Flexibility Act)
If you are applying as a VEOA candidate, you must submit a copy of your DD-214 and your letter from the VA reflecting an honorable discharge and that you either completed three years of active duty service or are a preference eligible. For more information see: https://www.fedshirevets.gov/job/shav/index.aspx#veoa.
If you are unable to apply online, require reasonable accommodation in the application process if you are an applicant with a disability, or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
ALL DOCUMENTS MUST BE RECEIVED BY 11:59 PM Eastern Time ON THE CLOSING DATE OF THIS ANNOUNCEMENT. If your application package is incomplete in any way, you will not be considered for this position, and requests for extensions will not be granted. Please double check your application package before you submit it.
ADDITIONAL INFORMATION WILL NOT BE SOLICITED OR ACCEPTED BY THIS OFFICE.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
A career with the U.S. Government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Learn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time, or intermittent. Contact the hiring agency for more information on the specific benefits offered.