Click on "" button below to view Eligibilities being considered and other IMPORTANT information.
The primary purpose of this position is to serve as a professional general engineer performing design, project programming, construction management/monitoring duties and improvement projects of real property
facilities and infrastructure, including utility systems in support of a military installation.
Performs planning and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of engineering.
Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of general engineering and knowledge of architecture.
Plans, programs, budgets, and executes required projects in support of assigned programs.
Performs work in facilities operations and maintenance (O and M) functions.
Provides consulting services and project coordination.
Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena.
Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
Occasional travel - May be required to travel by military and/or commercial aircraft to perform temporary duty assignments.
Job family (Series)
0801 General Engineering
Engineers, All Other
Conditions of Employment
U.S. Citizenship Required
Males must be registered for Selective Service, see www.sss.gov
We will conduct a security investigation and you must be able to obtain and maintain a SECRET security clearance.
Recruitment incentives may/may not be authorized
This position is subject to provisions of the DoD Priority Placement Program
Disclosure of Political Appointments
Work may occasionally require travel away from the normal duty station on military and commercial aircraft.
Work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position.
May act as project liaison with the Army Corps of Engineers or other design agencies as required.
Must meet the Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position. The incumbent will have up to 24 months to meet the applicable mandatory experience, education, and training requirements.
In order to qualify, you must meet the specilized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions.
BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT:
Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-11, or equivalent in other pay systems. Examples of specialized experience includes preparing, developing, or reviewing design calculations, cost estimates, schedules, underlying analysis, technical drawings, and specifications related to a wide variety of projects and engineering systems. Evaluating design objectives and identifying most economical and efficient procedures for building and utility design and performance, considering all functional and aesthetic requirements. Applying standard general engineering theory and practices to create engineering solutions without technical instruction or guidance and identifying limits of the problems involved.
COMBINATION OF EXPERIENCE AND EDUCATION:
Combination of education and experience - college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
Professional knowledge of civil, mechanical and electrical engineering concepts, principles, and practices and familiarity with architectural and other engineering disciplines.
Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders; of environmental principles, practices, procedures, laws, regulations, and current legislative issues; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non- appropriated funds.
Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions; and knowledge of program planning and budgeting cycles, financial control and budget systems and management.
Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings; and technique / skill in drafting sufficient to convey design concepts and ideas and formulate working drawings.
Ability to plan, conduct and record site/facilities surveys and inspection; to analyze, interpret, and apply results, rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.
Ability to plan and organize work and coordinate with other engineering disciplines and architects; and communicate effectively both orally and in writing and maintain good working relationships.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.
FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.
Current or Former Federal Civilian Employees (Includes current Air Force employees): You are required to submit legible copy/copies of your last or most recent SF-50, Notification of Personnel Action, (block 24 must be a "1" or "2" AND block 34 must be a"1"). Additionally, if you are applying for a higher grade (GS) and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one year time-in-grade requirement so you will need to provide an SF-50 which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-grade Grade/Range Increases, and SF-50s with an effective date more than one year old)
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be best-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated 90 or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected at the full performance level and placed at the full performance level.
Direct Deposit: All federal employees are required to have direct deposit.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017 suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. The law made taxable certain reimbursements and other payments, including driving mileage, airfare and lodging expenses, en-route travel to the new duty station, and temporary storage of those items. The Federal Travel Regulation Bulletin (FTR) 18-05 issued by General Services Administration (GSA) has authorized agencies to use the Withholding Tax Allowance (WTA) and Relocation Income Tax Allowance (RITA) to pay for "substantially all" of the increased tax liability resulting from the "2018 Tax Cuts and Jobs Act" for certain eligible individuals. For additional information on WTA/RITA allowances and eligibilities, please click here.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.
For additional information on what to include in your resume, click here.
Applicants who meet the requirements for and apply as a non-competitive eligible that meet minimal qualifications and other requirements of this position, will be given consideration as a non-competitive candidate and will be referred unless blocked by an individual with priority/preference.
APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.
Applicants who disqualify themselves will not be evaluated further.
Background checks and security clearance
Drug test required
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
Online Application: Questionnaire
Resume: For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
Veterans: If claiming VRA, VEOA or Veterans' Preference - Submit VOW certification memo or copy of the official DD-Form 214, which must include the character of service/type under honorable conditions (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD-Form 214. If you are also claiming 10-point preference and/or 30% Disabled Veteran, you must submit a VA Letter or a disability determination from a branch of the Armed Forces (or documentation of Purple Heart, if applicable).
Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old).
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD-Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD-Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
Name/Rank/Grade of Service Member
Branch of Armed Forces
Dates of Active Service (Start and End Date(s)
Expected Date of Discharge/Release from Active Duty
Terminal leave start date (if applicable)
Expected character of service/discharge and type of separation (i.e. separation or retirement)
Must be certified within 120 days of anticipated discharge
Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form-214 must be submitted upon receipt.
Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.
Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume.
Note: Applicant must not submit award SF50s-Notification of Personnel Actions (SF50s).
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
A career with the U.S. Government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Learn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time, or intermittent. Contact the hiring agency for more information on the specific benefits offered.
This job is open to
Career transition (CTAP, ICTAP, RPL)
Federal employees who meet the definition of a "surplus" or "displaced" employee.
Federal employees - Competitive service
Current or former competitive service federal employees.
Land & base management
Certain current or former term or temporary federal employees of a land or base management agency.
Clarification from the agency
Eligible NAF employees are considered under Hiring Path - "Federal employees-Excepted service"