Offshore Maintenance Group
Transocean is focused on being the employer of choice for the drilling industry.
We are challenging ourselves every day to push the performance of the company through technological advances and passion for our work.
Assist in maintaining and repairing mechanical, pneumatic and hydraulic equipment onboard the vessel
Reports to the Second Assistant Engineer SUPERVISION: Supervises the Motor Operator PREREQUISITES / QUALIFICATIONS: - - High School Diploma (U.S.)/ Proof of Completion of Formal Education or Relevant Craft Certificate (where applicable) - Successful Military Discharge – Preferred for U.S.
DUTIES AND RESPONSIBILITIES:
- Graduate of Trade School or University where knowledge and training acquired are applicable to job requirements - Preferred
Operations/Maintenance: - Ensure conformance to Company policies, local and international regulations relating to the operation of the rig, and current pollution regulations - Authority I - Perform daily inspections and maintenance on mechanical equipment - Authority I - Ensure compliance with the Rig Maintenance System (RMS) and ensure all records are maintained on a timely basis - Authority II - Carry out periodic maintenance according to RMS guidelines and coordinate that maintenance with supervisors and other department heads - Authority II - Ensure that reports for repair and maintenance of equipment are accurate and complete - Authority II - Assist with maintenance and repair of power plants, cooling water system, lube oil system, and fuel system - Authority II - Assist in troubleshooting and repairing faulty mechanical, pneumatic and hydraulic drilling equipment and tools - Authority II - Assist in maintaining marine equipment, i.e. cranes, thrusters, ballast pumps and valves, auxiliary equipment, etc. - Authority II - Apply the permit to work and isolation systems as required - Authority I - Assist in implementing outstanding recommendations from audits, as issued by Clients, Regulatory Authorities or rig management - Authority II - In conjunction with the Second Engineer, monitor and control the use and distribution of consumables/materials; generate requisitions as required - Authority II - Assist in ensuring that all third-party equipment is fit for purpose, certified, correctly installed, and maintained while on the rig - Authority II - Ensure that service, maintenance and other operational reports are accurate and complete - Authority I - Inform supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig - Authority I - Carry out classification society surveys as part of continuous survey of machinery - Authority I QHSE: - - Incorporate the THINK planning process into all tasks, whether working alone or as part of a team - Authority I - Participate daily in START Process - Authority I - Apply START Monitoring during the execution of planned tasks - Authority I - Ensure that subordinate personnel are properly trained to perform START observations and monitoring - Authority I - Call a Time Out for Safety (TOFS) whenever an unplanned hazard or a change in the expected results is observed - Authority I - Ensure compliance with regulatory requirements for environmental protection - Authority I - Actively participate in weekly safety meetings and pre-job meetings as required - Authority I - Respond to emergency situations and environmental protection issues as per designation on station bill - Authority II - Report any incidents, potential hazards or abnormal situations to supervisor and other department heads - Authority I - Assist in preparing Safety Analysis for hazardous situations - Authority II - Ensure that a high standard of hygiene and housekeeping is maintained onboard the rig - Authority I Personnel: - - Meet the training requirements according to the applicable training matrix - Authority I - Participate fully in the annual performance appraisal process - Authority I - Mentor, develop and train crew members to ensure that they are competent to work at their next job level - Authority II - Supervise and guide the Motor Operator and Mechanic Trainee in their On-the-Job Training (OJT) program - Authority I - Maintain discipline onboard and ensure compliance with Company disciplinary procedures - Authority I
If you want to push yourself to great achievement, let Transocean develop your career.