Click on "" button below to view Eligibilities being considered and other IMPORTANT information.
The primary purpose of this position is to to serve as a senior professional electronics engineer with project management, execution, and operational responsibility in assigned area(s). Considered the technical expert for the organization in electronics engineering assignments.
Performs professional electronics engineering work involved in the application of advanced theories, concepts, principles, and processes to the acquisition, development, or sustainment of weapon systems, subsystems, and/or support equipment.
Functions as the organization's technical specialist in design and development engineering for critical systems and devices. Analyzes and studies requirements against a range of diverse considerations
Performs complex and comprehensive analysis and uses systematic, disciplined, and quantifiable approaches to implement, develop, and document projects. Evaluates procedures and employs innovative techniques and methods to achieve goals.
Serves as a consultant and technical expert to senior subject matter specialists and/or agency officials responsible for broad program operations. Attends meetings, conferences, briefings, and seminars related to project or program support.
Occasional travel - Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
Job family (Series)
0855 Electronics Engineering
Conditions of Employment
U.S. Citizenship Required
Males must be registered for Selective Service, see www.sss.gov
Required to obtain and maintain a Top Secret Clearance.
Travel and relocation expenses will not be paid
Recruitment incentives may/may not be authorized
This posn is subject to provisions of the DoD Priority Placement Program
Disclosure of Political Appointments
A professional engineering degree at the bachelor's level from an ABET accredited institution in Electronics Engineering or a closely related engineering discipline is highly desired.
The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position.
This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
(Cont) Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
The work requires the incumbent to be subject to recall during non-duty hours, weekends, and holidays to complete proposals and/or resolve problems.
May be required to acquire and maintain certification(s), such as Acquisition Professional Development Program (APDP).
In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions, to include the Individual Occupational Requirements (IOR) for the GS-0855-13, Electronics Engineering Series. For information click here.
BASIC REQUIREMENTS: Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. NOTE: You must submit a copy of college transcripts with your application.
COMBINATION OF EDUCATION AND EXPERIENCE: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. NOTE: You must submit a copy of college transcripts with your application.
AND in addition to meeting the basic requirement above, you must also meet the qualification requirements below:
SPECIALIZED EXPERIENCE: One year of specialized experience that equipped the applicant with a particular knowledge, skills, and abilities (KSA's) to successfully perform the duties of the position, and that is typically related in or related to the position to be filled. To be creditable, the specialized experience must have been at the GS-12 grade level or equivalent under other pay systems in the Federal Service. Examples of creditable specialized experience includes advanced electronics engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment sufficient to apply experimental theories, principles, and concepts to project development, execution, and advisory services; advanced concepts, principles, practices, methods, and techniques to provide expert judgment concerning programs/operations; resolve unique or novel problems, conditions, or issues; and significantly alter standard practices, processes, and known techniques; principles of planning and program management to execute significant projects which represent an important segment of the agency's operating program.
FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-12 level is required to meet the time-in-grade requirements for the GS-13 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of professional electronics engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment to effectively apply advanced engineering theories, principles, and concepts to project development, execution, and advisory services.
2. Knowledge of development testing and evaluation sufficient to apply experimental theories and new applications to issues and provide technical advice and direction in support of weapon systems, subsystems, and/or support equipment.
3. Knowledge of integrated space and ground systems, and support equipment sufficient to plan, design, test, troubleshoot, evaluate, and oversee the development and/or sustainment of electronic systems or devices.
4. Knowledge of the principles of planning and program management; standard acquisition regulations, practices, and procedures; and other engineering disciplines.
5. Ability to devise and evaluate criteria, parameters, characteristics, and interrelationships for design approaches, and to assess the impact of new technology on current systems and processes.
???????6. Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.
FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.
Current or Former Federal Civilian Employees (Includes current Air Force employees): You are required to submit legible copy/copies of your last or most recent SF-50, Notification of Personnel Action, (block 24 must be a "1" or "2" AND block 34 must be a"1"). Additionally, if you are applying for a higher grade (GS) and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one year time-in-grade requirement so you will need to provide an SF-50 which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-grade Grade/Range Increases, and SF-50s with an effective date more than one year old)
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service of more than three (3) calendar days may be required prior to appointment to the position.
Direct Deposit: All federal employees are required to have direct deposit.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.
For additional information on what to include in your resume, click here.
Applicants who meet the requirements for and apply as a non-competitive eligible that meet minimal qualifications and other requirements of this position, will be given consideration as a non-competitive candidate and will be referred unless blocked by an individual with priority/preference.
APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.
Applicants who disqualify themselves will not be evaluated further.
Background checks and security clearance
Drug test required
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
Online Application: Questionnaire
Resume: For qualification determinations your resume must contain hours worked per week and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
Veterans: If claiming VRA, VEOA or Veterans' Preference - Submit VOW certification memo or copy of the official DD-Form 214, which must include the character of service/type under honorable conditions (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD-Form 214. If you are also claiming 10-point preference and/or 30% Disabled Veteran, you must submit a VA Letter or a disability determination from a branch of the Armed Forces (or documentation of Purple Heart, if applicable).
Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old).
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD-Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD-Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
Name/Rank/Grade of Service Member
Branch of Armed Forces
Dates of Active Service (Start and End Date(s)
Expected Date of Discharge/Release from Active Duty
Terminal leave start date (if applicable)
Expected character of service/discharge and type of separation (i.e. separation or retirement)
Must be certified within 120 days of anticipated discharge
Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form-214 must be submitted upon receipt.
Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
A career with the U.S. Government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Learn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time, or intermittent. Contact the hiring agency for more information on the specific benefits offered.